If you have EZ lube spindles with the grease fitting on the end, as seen in the video you are referring to for Replacement Trailer Hub Bearing # LM11949, you will just fill until the new grease starts to come out of the spindle.
If you don't have spindles with the grease fitting and you are referring to the grease fitting on a Bearing Buddy like Bearing Buddy Bearing Protectors # BB1781, then there is an over-fill protective spring that allows grease to overflow out of the cap when it's... view full answer...
On the Furrion Vision S Wireless RV Observation Camera System w/ Side Marker Light Cameras # FCE48TASL-05 the Red (V+ Camera) goes to the positive wire of the running light circuit, the Black (GND) to the ground, the Yellow (Trigger) to the left/right turn signal (only available for LED versions), and the Brown (V+ Lamp) to the positive wire of the running light. If you had a turn signal circuit you would need to wire the Yellow wire to that, but since you don't you can just cap the wire... view full answer...
Go To Results